Section Perimeter Beams

The SPI system is a sectionable infrared beam system that goes around your property following its contour and corners.

Product Details

The SPI system is a sectionable infrared beam system that goes around your property following its contour and corners.


The two-wire system supplies power to the units as well data communicating their status back to the control unit. Each section is programmed with a zone number to identify which zone has been trigger at the control panel. You may also turn on or off individual sectors as required from the KeyPad. Each section has its own individual selectable sensitivity (break detection time) from 0.3 to 10 seconds. Multiple or single activations can be programmed on each sector too.

Master Unit

The SPI system has a master unit used to interface to any alarm panel, providing an output for each sector should it be triggered. Sensitivity is still configurable in this configuration.

Features

  • Extremely easy to install with only two wires only
  • Very easy to align with internal pan & tilt lens
  • Each sector may be programmed to have different detection times
  • Each sector may be individually turned ON or OFF from the keypad
  • Common or separate alarm output for each sector
  • Very low power consumption (100 mA for 8 beams )
  • Very versatile applications
  • Low Cost
  • 12v DC operation

Add Passive Infrared Detector

The detector may be used as a zone on its’ own, or in conjunction with the beams to offer a double trigger condition to eliminate false alarms. That is, the passive and beam must be triggered in order for an alarm to be raised.

« Back to Solutions   |   Browse other products in Beams: Beams »